Input Power
Number of Phase / Wire	L, N and PE (Ground), hardwired with terminal block
Input Rating	230 Vac, single phase, 16 A or 32 A maximum, 50/60 Hz
Standby Power	<5W

Output Power
Output Rating	230 Vac, single phase, 16 A or 32 A maximum, 50 / 60 Hz
Charging Interface	3.68 kW Socket or 7.4 kW Plug

Environment
Operating Temperature	-30 C to + 50 C (-22 F to +122 F)
Storage Temperature	-40 C to + 80 C (-40 F to +176 F)
Humidity	<95% relative humidity, non-condensing
Altitude	Up to 2,000 m (6,000 ft.)

User Interface & Control
Buttons and Switch	Key switch, On/Off switch, Reset button, Emergency stop button
Status Indicators	Power, Status, Charge, Fault
Charger Configuration	Charging Current Adjustment, Charging Duration Limitation

Protection
Upstream	In accordance with local regulations
Electrical Protection	Over current, Under voltage, Over voltage, Residual current, Surge protection, Short circuit, Over temperature, Ground fault, Plug-out protection
Cold-Load Pickup	Randomized delay before charge resume after power failure
Automatic recovery after Nuisance Trip	The EVSE will automatically resume charging after a minor fault such as OVP, UVP, OTP or OCP. No user intervention required.

Communication
Network Interface	Ethernet (standard), 3G (option) for backend communication Ethernet (standard) for local access
Charging Protocol	OCPP 1.6

Mechanical
Ingress Protection	IP55
Enclosure Protection	Ik08 according to IEC 62262
Cooling	Natural cooling
Dimension (WxHxD) / Weight	363 x 318 x 136 mm (14.3 x 12.6 x 5.4 inch), excluding charging cable, mounting plate and cable holder, 3.7kg (8.2 lbs), without package

Regulation
Certificate / Compliance	CE, IEC 61851-1, IEC 61851-2